HT Series™ Framing - Wedge Floor Anchors

Hex nut and washer included

Supplied in carbon steel

Use 1/2” wedge anchors with floor
mount base plates

Wedge Floor Anchor Technical Information

Part No.	A	B	C	D (Min)	lbs.
2906	1/2-13	3.750	2.250	2.250	.228
2907	1/2-13	5.500	3.000	2.250	.309
2908	1/2-13	7.000	4.500	2.250	.378

How To Install Wedge Floor Anchors:

Step #1

Drill a hole perpendicular to the
work surface with a diameter
equal to the anchor diameter.
Drill the hole to a depth
exceeding the minimum
embedment, but not closer than
two anchor diameters to the
opposite concrete surface.

Step #2

Clean the hole using compressed air. A clean hole is
recommended for proper
performance of the anchor.

Step #3

Place the anchor in the drilled
hole with the wedge facing
down. Use a hammer to drive
the anchor down into the hole.
As the nut is tightened, the
flange will engage into the
concrete securing the anchor
into place.