80/20 Service & Support - Retainer Angle Profiles

Fractional mill-finish material (unanodized) is stocked in 145" lengths. The maximum length for anodized material is 120". A cut charge is required for any length other than stock.

* Maximum length for mill-finish (unanodized) material
is 144"

** 6061-T6 or equivalent stock

Fractional Technical Information

Clear Anodized	Mill Finish	A	B	C	D	E	F	Weight
8515	8516	1.938	.563	.188	.375	1.000	.938	.489 lbs./ft
8510	8511	2.879	.840	.250	.590	1.500	1.379	1.120 lbs./ft

Metric Technical Information

Metric mill-finish material (unanodized) is stocked in 4 meter lengths. The maximum length for anodized material is 3 meters. A cut charge is required for any length other than stock.

Clear Anodized	Mill Finish	A	B	C	D	E	F	Weight
25-8515	25-8516	48.5	13.3	4.0	9.3	25.0	23.5	.623 kg./m
40-8510	40-8511	77.0	21.95	6.0	15.95	40.0	37.0	1.503 kg./m

Fractional Technical Information

Clear Anodized	Mill Finish	A	B	C	D	E	F	Weight
8610	8611	3.021	.563	.188	.375	1.000	1.021	1.020 lbs./ft
8512	8513	4.520	.840	.250	.590	1.500	1.523	1.540 lbs./ft

Metric Technical Information

Metric mill-finish material (unanodized) is stocked in 4 meter lengths. The maximum length for anodized material is 3 meters. A cut charge is required for any length other than stock.

Clear Anodized	Mill Finish	A	B	C	D	E	F	Weight
25-8610	25-8611	75.5	13.3	4.0	9.3	25.0	25.5	1.025 kg./m
40-8512	40-8513	120.59	21.95	6.0	15.95	40.0	40.6	2.521 kg./m