80/20 Service & Support - Angle Profiles

Fractional mill-finish material (unanodized) is stocked in 145" lengths. The maximum length for anodized material is 120". A cut charge is required for any length other than stock.

* Maximum length for mill-finish (unanodized) material is 144"
** 6061-T6 or equivalent stock

Fractional Technical Information

Clear Anodized	Mill Finish	Alloy	A	B	C	D	E	Weight
8210	8211*	6061-T6**	1.000	1.000	.125	.028	.125	.275 lbs./ft
8217	8218	6105-T5	1.000	1.000	.188	.188	.125	.400 lbs./ft
8212	8213	6105-T5	1.000	2.000	.188	.188	.125	.635 lbs./ft
8215	8216*	6061-T6**	1.500	1.500	.188	.125	.188	.619 lbs./ft
8220	8221	6105-T5	1.500	1.500	.250	.250	.312	.809 lbs./ft
8230	8231	6105-T5	1.500	3.000	.250	.250	.312	1.368 lbs./ft
8222	8223	6105-T5	2.000	2.000	.188	.188	.125	.850 lbs./ft
8225	8226*	6061-T6**	2.500	2.500	.188	.125	.250	.750 lbs./ft
8232	8233*	6061-T6**	3.000	3.000	.188	.125	.125	1.250 lbs./ft
8235	8236	6105-T5	3.000	3.000	.250	.250	.312	1.680 lbs./ft
8240	8241	6105-T5	4.500	4.500	.250	.250	.312	2.618 lbs./ft

Metric Technical Information

Metric mill-finish material (unanodized) is stocked in 4 meter lengths. The maximum length for anodized material is 3 meters. A cut charge is required for any length other than stock.

Clear Anodized	Mill Finish	Alloy	A	B	C	D	E	Weight
25-8210	25-8211	6105-T5	25.0	25.0	3.0	3.0	3.0	.384 kg./m
25-8217	25-8218	6105-T5	25.0	25.0	4.0	4.0	3.0	.493 kg./m
25-8212	25-8213	6105-T5	25.0	50.0	4.0	4.0	3.0	.769 kg./m
40-8220	40-8221	6105-T5	40.0	40.0	6.0	6.0	8.0	1.221 kg./m
40-8230	40-8231	6105-T5	40.0	80.0	6.0	6.0	8.0	1.885 kg./m
25-8222	25-8223	6105-T5	50.0	50.0	4.0	4.0	3.0	1.045 kg./m
40-8235	40-8236	6105-T5	80.0	80.0	6.0	6.0	8.0	2.550 kg./m